Artigos

14/02/2018

 

FIORONI, C. A.; INNOCENTINI,M. D. M; MÁRMOL DE LOS DOLORES, G.; TONOLI, G. H. D.; PAULA, G. R.; SAVASTANO JUNIOR, Holmer. Cement-based corrugated sheets reinforced with polypropylene fibres subjected to a high-performance curing method. Construction and Building Materials (Elsevier). In press. https://doi.org/10.1016/j.conbuildmat.2020.120791

 

NEVES, D. C. O.S.; SILVA, A. L.; ROMANO, R. C. O.; GOUVÊA, D. Fe2O3-doped SnO2 membranes with enhanced mechanical resistance for ultrafiltration application. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v. 40, p. 5959-5966, 2020.

 

ROMANO, R. C. O.; BERNARDO, H. M.; DANTAS, S. R. A.; CINCOTTO, M. A.; PILEGGI, R. G. Influência da utilização de diferentes teores de lama vermelha nas propriedades de ladrilhoshidráulicos. AMBIENTE CONSTRUÍDO, v. 20, p. 647-659, 2020.

 

DANTAS, S. R. A.; SERAFINI, R.; ROMANO, R. C. O.; VOTTORINO, F.; LOH, K. Influence of polypropylene microfiber (PPMF) dispersion procedure on fresh and hardened rendering mortar properties. AMBIENTE CONSTRUÍDO, v. 20, p. 7-23, 2020.

 

BERNARDO, H. M.; ROMANO, R. C. O.; CINCOTTO, M. A.; PILEGGI, R. G. Efeito da absorção de água e do tipo de substrato no desempenho de argamassa de revestimentonosestados fresco e endurecido. AMBIENTE CONSTRUÍDO (ONLINE), v. 20, p. 493-511, 2020.

 

RODIER, LOÏC ; DA COSTA CORREIA, VIVIANE ; JUNIOR, HOLMER SAVASTANO . Elaboration of eco-efficient vegetable fibers reinforced cement-based composites using glass powder residue. CEMENT & CONCRETE COMPOSITES, v. 110, p. 103599, 2020. http://dx.doi.org/10.1016/j.cemconcomp.2020.103599

 

SILVA, D. F.; QUATTRONE, M.; ROMANO, R. C. O.; ANGULO, S. C. Reuse of fines from ready-mix concrete washing slurries. RESOURCES CONSERVATION AND RECYCLING, v. 155, p. 104653, 2020. https://doi.org/10.1016/j.resconrec.2019.104653

 

HABERT, S. A. MILLER, V. M. JOHN, J. L. PROVIS, A. FAVIER, A. HORWATH & K. L. SCRIVENER. Environmental impacts and decarbonization strategies in the cement and concrete industries. Nat Rev Earth Environ, 2020. https://doi.org/10.1038/s43017-020-0093-3

 

TRENTIN, A.; GASPARINI A. de L.; FARIA, F. A.; HARB, S.V.; DOS SANTOS, F. C.; PULCINELLI, S. H.; Santilli, C.V.; HAMMER, P. Barrier properties of high performance PMMA-silica anticorrosive coatings,  Progress in Organic Coatings, 2020. https://doi.org/10.1016/j.porgcoat.2019.105398

 

BETIOLI, A.M.; FORTUNATO, M.; MARTINS, B. R.; ROCHA, J. C.; CASALI, J. M.; COLLODETTI, G. Efeito da composição granulométrica e da área superficial específica de resíduos de polimento de porcelanato em argamassas autoadensáveis, Revista Ambiente Construído, 2020. https://doi.org/10.1590/s1678-86212020000300428

 

ANGULO, S.C.; SILVA, NATALIA V. ; LANGE, DAVID A. ; TAVARES, LUÍS MARCELO . Probability distributions of mechanical properties of natural aggregates using a simple method. Construction and Building Materials, 2020. https://doi.org/10.1016/j.conbuildmat.2019.117269

 

SILVA, A. L. F.; Salas, R. A.; Silva, E. C. N.; J. N. Reddy. Topology optimization of fibers orientation in composite material with hyperelastic matrix. Composite Structures, 2020. https://doi.org/10.1016/j.compstruct.2019.111488

 

HARB, S.V.; A. Trentin, DE SOUZA, T. A. C.; MAGNANI, M.; PULCINELLI, S. H.; SANTILLI, C. V.; HAMMER, P., Effective corrosion protection by eco-friendly self-healing PMMA-cerium oxide coatings,  Chemical Engineering Journal, 2020. https://doi.org/10.1016/j.cej.2019.123219

 

HARB, S.V.; TRENTIN, A.; PULCINELLI, S. H.; SANTILLI, C. V.; HAMMER, P. Hydroxyapatite and β-TCP modified PMMA-TiO2 and PMMA-ZrO2 bioactive anticorrosive coatings for Ti6Al4V metallic implants, Biomaterials, 2020. https://doi.org/10.1016/j.msec.2020.111149

 

ULSEN, CARINA ; TSENG, ESTER ; Angulo, Sérgio Cirelli ; LANDMANN, MIRKO ; CONTESSOTTO, RENATO ; BALBO, JOSÉ TADEU ; KAHN, HENRIQUE . Concrete aggregates properties crushed by jaw and impact secondary crushing. Journal of Materials Research and Technology-JMR&T,  2019. https://doi.org/10.1016/j.jmrt.2018.04.008

 

BALDUSCO, R. ; NOBRE, T. R. S. ; ANGULO, S. C.; QUARCIONI, V. A. ; CINCOTTO, M. A. Dehydration and Rehydration of Blast Furnace Slag Cement. Journal of Materials in Civil Engineering, 2019. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002725

 

KATAGUIRI, K. ; BOSCOV, M. E. G. ; TEIXEIRA, C. E. ; ANGULO, S. C. Characterization flowchart for assessing the potential reuse of excavation soils in Sao Paulo city. Journal of Cleaner Production, 2019. https://doi.org/10.1016/j.jclepro.2019.118215

 

ROJAS-RAMIREZ, R. A.; MACIEL, M. H.; ROMANO, R. C. O.; PILEGGI, R. G.; VIEIRA COELHO, A. C. Impacto do uso de resíduo de vermiculita no estadoendurecido de argamassas. CERÂMICA, v. 65, p. 107-116, 2019.

 

ROJAS-RAMIREZ, R. A.; MACIEL, M. H.; ROMANO, R. C. O.; PILEGGI, R. G.; VIEIRA COELHO, A. C. The impact of vermiculite residual fines in the rheological properties of cement pastes formulated with different waste contents. APPLIED CLAY SCIENCE, v. 170, p. 97-105, 2019.

 

GRAZIA, M. T.; SANCHES, L.; MESQUITA, J. A. F. S.; ROMANO, R. C. O.; PILEGGI, R. G. Investigation of the use of continuous particle packing models (PPMs) on the fresh and hardened properties of low-cement concrete (LCC) systems. CONSTRUCTION AND BUILDING MATERIALS, v. 195, p. 524-536, 2019.

 

SILVA, N. V. ; ANGULO, S. C. ; BARBOSA, A. S. R. ; LANGE, D. A. ; TAVARES, L. M. Improved method to measure the strength and elastic modulus of single aggregate particles. Materials and Strucutures,  2019. https://doi.org/10.1617/s11527-019-1380-7

 

DANTAS, S. R. A.; SERAFINI, R.; ROMANO, R. C. O.; VOTTORINO, F.; LOH, K. Influence of the nano TiO2 dispersion procedure on fresh and hardened rendering mortar properties. CONSTRUCTION AND BUILDING MATERIALS, v. 215, p. 544-556, 2019.

 

ROMANO, R. C. O.; BERNARDO, H. M.; MACIEL, M. H.; PILEGGI, R. G.; CINCOTTO, M. A. Using isothermal calorimetry, X-ray diffraction, thermogravimetry and FTIR to monitor the hydration reaction of Portland cements associated with red mud as a supplementary material. Journal of Thermal Analysis and Calorimetry (Online), p. 1-14, 2019.

 

DA LUZ, G. ; GLEIZE, P. J. P. ; BATISTON, E. R.; PELISSER, F. Effect of pristine and functionalized carbon nanotubes on microstructural, rheological, and mechanical behaviors of metakaolin-based geopolymer. Cement & Concrete Composites, 2019. https://doi.org/10.1016/j.cemconcomp.2019.05.015

 

ALVES-ROSA, M.A.; VASCONCELLOS, J.Z.; SANTILLI, C.V.; PULCINELLI, S.H. Sulfated tin oxide with macro- and mesopores controlled using an integrated sol-gel and surfactant. template route. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2019. https://doi.org/10.1016/j.colsurfa.2019.124012

 

ARRUDA,R.; MEIRA, G. R. ; BRAGA, F. A. V. ; FERREIRA, K. ; ALVES, A. . Use of numerical method for optimization of granulometric curves in eco-efficient concrete. In: 9th INTERNATIONAL CONFERENCE ON CONCRETE UNDER SEVERE CONDITIONS-ENVIRONMENT & LOADING, 2019, Porto Alegre. 9th INTERNATIONAL CONFERENCE ON CONCRETE UNDER SEVERE CONDITIONS-ENVIRONMENT & LOADING. Porto Alegre: Unisinos University, 2019. v. 1.

 

TONOLI, G. H. D.;CARMELLO, G. F.;FIORONI, C. A.;PEREIRA, T. L.;ROCHA, G.;SOUZA, R. B.;JOHN, V. M.; SAVASTANO JR, H. Influence of the initial moisture content on the carbonation degree and performance of fiber-cement composites. Construction and Building Materials, 2019. https://doi.org/10.1016/j.conbuildmat.2019.04.159

 

MÁRMOL, G.; SAVASTANO JR, H. Cellulose-Cement Carbonatation. In:  39th Cement and Concrete Science Conference. 2019.

 

MÁRMOL, G.; SAVASTANO JR, H. The use of lignocellulosic fibers in cement based materials – challenges and achievements. In: 4th INTERNATIONAL CONFERENCE ON NATURAL FIBERS. 2019.

 

MÁRMOL, G.; SAVASTANO JR, H.; FUENTES, E.; MIRANDA, R.; BLANCO, A.; NEGRO, C. Effect of sepiolite addition on fibre-cement based on MgO-SiO₂ systems. Cement and Concrete Research, 2019. https://doi.org/10.1016/j.cemconres.2019.105816

 

MÁRMOL, G.; RIBES, A.; AMIGÓ, V.; SAVASTANO JR, H. Assessment of Sisal Fiber Integrity as a Reinforcing Element in MgOBased Cement Matrices. Waste and Biomass Valorization, 2019. https://doi.org/10.1007/s12649-019-00605-0

 

MEJIA-BALLESTEROS, J. E.; SAVASTANO JR, H. ; FIORELLI, J. ; ROJAS, M. F. Effect of mineral additions on the microstructure and properties of blended cement matrices for fibre-cement applications. Cement & Concrete Composites, 2019. https://doi.org/10.1016/j.cemconcomp.2019.02.001

 

DA COSTA CORREIA, VIVIANE ; ARDANUY, MÒNICA ; CLARAMUNT, JOSEP ; SAVASTANO, HOLMER . Assessment of chemical and mechanical behavior of bamboo pulp and nanofibrillated cellulose exposed to alkaline environments. Cellulose, v. 2019, p. 1-17, 2019. http://dx.doi.org/10.1007/s10570-019-02703-7

 

BALLESTEROS, J. E. M.; MÁRMOL, G. ; FILOMENO, R. ; RODIER, L. ; SAVASTANO, H. ; FIORELLI, J. . Synergic effect of fiber and matrix treatments for vegetable fiber reinforced cement of improved performance. Construction and Building Materials, 2019. https://doi.org/10.1016/j.conbuildmat.2019.02.007

 

SILVA, A. L. F.; SALAS, R. A.; SILVA, E. C. N. SIMULTANEOUS OPTIMIZATION OF FIBER AND MATERIAL DISTRIBUTION FOR COMPOSITE MATERIALS BASED ON TOPOLOGY OPTIMIZATION. In: CILAMCE 2019, Natal.

 

JESUS, C. R. N.; MOLINA, E. F.; PULCINELLI, S. H.; SANTILLI, C. V. Highly Controlled Diffusion Drug Release from Ureasil- Poly(ethylene oxide)-Na+-Montmorillonite Hybrid Hydrogel Nanocomposites. ACS Applied Materials & Interfaces, 2018. https://doi.org/10.1021/acsami.8b04559

 

BERMÚDEZ, Y. H.; TRUFFAULT, L.; PULCINELLI, S. H.; SANTILLI, C. V. Sodium montmorillonite/ureasil-poly(oxyethylene) nanocomposite as potential adsorbent of cationic dye. Applied Clay Science, 2018. https://doi.org/10.1016/j.clay.2017.11.009

 

PALÁCIO, G.; PULCINELLI, S. H.; MAHIOU, R.; BOYER, D.; CHADEYRON, G.; SANTILLI, C. V. Coupling Photoluminescence and Ionic Conduction Properties Using the Different Coordination Sites of Ureasil-Polyether Hybrid Materials. ACS Applied Materials & Interfaces, 2018. https://doi.org/10.1021/acsami.8b11149

 

CORREIA, V. C.;SANTOS, S. F.; TEIXEIRA, R. S. ;SAVASTANO JR, H. Nanofibrillated cellulose and cellulosic pulp for reinforcement of the extruded cement based materials. Construction and Building Materials, v. 160, p. 376-384, 2018.

 

AZEVEDO, NAGILLA HUERB DE; GLEIZE, PHILIPPE J.P. . Effect of silicon carbide nanowhiskers on hydration and mechanical properties of a Portland cement paste. Construction and Building Materials, v. 169, p. 388-395, 2018.

 

TORRICO, R. F. A. O.; Torrico, HARB, S.V.; TRENTIN, A.; A; UVIDA, M. C.; PULCINELLI, S. H.; SANTILLI, C. V.; HAMMER, P. Structure and properties of Epoxy-Siloxane-Silica nanocomposite coatings for corrosion protection, Journal of Colloid And Interface Science v. 513, p. 617 – 628, 2018.DOI: 10.1016/j.jcis.2017.11.069

 

MATOS, PAULO RICARDO DE; PRUDÊNCIO, LUIZ ROBERTO ; OLIVEIRA, ALEXANDRE LIMA DE ; PELISSER, FERNANDO ; GLEIZE, PHILIPPE JEAN PAUL . Use of porcelain polishing residue as a supplementary cimentitious material in self-compacting concrete. Construction and Building Materials, v. 193, p. 623-630, 2018.

 

COSTA CORREIA, VIVIANE DA; SANTOS, SERGIO FRANCISCO ; SAVASTANO, HOLMER . Vegetable fiber as reinforcing elements for cement based composite in housing applications – a Brazilian experience. MATEC WEB OF CONFERENCES, v. 149, p. 01007, 2018. http://dx.doi.org/10.1051/matecconf/201714901007

 

TONOLI, G. H. D.;FIORONI, C. A.;CARMELLO, G. F.;PEREIRA, T. L.;PAULA, G. R.;SOUZA, R. B.;JOHN, V. M.;SAVASTANO JÚNIOR, H. Influence of the initial moisture content on the carbonation degree of fiber cement composites. In: International Inorganic-Bonded Fiber Composites Conference, 2018, Cape Town. Proceedings of the IIIBCC 2018, 2018. p. 131-138.

 

CABRAL, M. R.; NAKANISHI, E. Y. ; SANTOS, V. ; PALACIOS, J. ; GODBOUT, S. ;SAVASTANO JUNIOR, H.;FIORELLI, J.. Evaluation of pre-treatment efficiency on sugarcane bagasse fibers for the production of cement composites. Archives of Civil and Mechanical Engineering, v. 18, p. 1092-1102, 2018.

 

CABRAL, M. R.; NAKANISHI, E. Y. ;FIORELLI, J.. Cement-Bonded Panels Produced with Sugarcane Bagasse Cured by Accelerated Carbonation. Journal of Materials in Civil Engineering, v. 30, p. 04018103, 2018.

 

SILVA, A. L. F.; Salas, R. A.; Silva, E. C. N. A FIBER OPTIMIZATION METHOD BASED ON NORMAL DISTRIBUTION FUNCTION FOR HYPERELASTIC MATERIALS. In CILAMCE 2018.

 

CABRAL, MATHEUS ROBERTO; NAKANISHI, ERIKA YUKARI ; FIORELLI, JULIANO . Evaluation of the Effect of Accelerated Carbonation in Cement-Bagasse Panels after Cycles of Wetting and Drying. Journal of Materials in Civil Engineering, v. 29, p. 04017018, 2017.

 

SANTOS, WINNIE F. ; QUATTRONE, MARCO ; JOHN, VANDERLEY M. ; ANGULO, SERGIO C. . Roughness, wettability and water absorption of water repellent treated recycled aggregates. Construction and Building Materials, v. 146, p. 502-513, 2017.

 

BALLESTEROS, JULIAN EDUARDO MEJIA; DOS SANTOS, VALDEMIR ; MÁRMOL, GONZALO ; FRÍAS, MOISÉS ; FIORELLI, JULIANO . Potential of the hornification treatment on eucalyptus and pine fibers for fiber-cement applications. Cellulose, v. 24, p. 2275-2286, 2017.

 

SANTOS, R. M. M., TRONTO, J., BRIOS, V., SANTILLI, C. V. Thermal decomposition and recovery properties of ZnAl–CO3 layered double hydroxide for anionic dye adsorption: insight into the aggregative nucleation and growth mechanism of the LDH memory effect. Journal of Materials Chemistry A, 2017, 5, 9998. DOI: 10.1039/C7TA00834A

 

SANTOS, W. F.; QUATTRONE, M.; JOHN, V. M.; ANGULO, S. C. Roughness, wettability and water absorption of water repellent treated recycled aggregates. Construction and Building Materials, v. 146, p. 502-513, AUG 15 2017. https://doi.org/10.1016/j.conbuildmat.2017.04.012